Coltene CanalPro CL2, User Manual

Page: 8 / 108

CanalPro
TM
CL2 Cordless Handpiece
8
4.0 Operation
4.1 Switches
4.1.1 Power Switch
4.1.1.1 To turn it ON, press and hold the switch for longer than 1 second
when the power is OFF.
4.1.1.2 To turn it OFF, press and hold the switch for longer than 1 second
while the power is ON.
4.1.2 Motor On/Off Switch
4.1.2.1 Simply pressing this switch will turn the motor on or off depending
on its current state (ON or OFF).
4.1.3 Program Switch
4.1.3.1 Toggles through mode 1, 2, 3 and 4 for each time the switch
is pressed. The preset values (speed, torque and gear ratio) are
displayed as each mode is selected.
4.1.4 Select Switch
4.1.4.1 Pressing this switch will change the menu item selected. The
operation of this switch is dependent on whether the handpiece is
on or off.
4.1.4.1.1 If the handpiece is off this switch will toggle between
Speed, Torque, Gear Ratio, Run Mode and Speed.
4.1.4.1.2 If the handpiece is on this switch will toggle between
Speed and Torque.
Menu Item Descriptions
Speed (SP) — Speed can be adjusted by pressing the increment
or decrement switch.
Torque (TRQ) — The torque of the handpiece is adjustable.
Gear Ratio (GR) — Sets the gear ratio of the contra angle which is
connected to the unit.
Run Mode (PRG) — Selects the mode of the handpiece.