Coltene CanalPro CL2, User Manual

Page: 9 / 108

9
CanalPro TM CL2 Cordless Handpiece
4.1.4.1.3 When Auto Stop Reverse Forward (ASRF) is
selected: and will blink.
4.1.4.1.4 When Auto Stop Reverse Stop (ASRS) is selected:
blinks
4.1.4.1.5 When Auto Stop is selected: blinks
4.1.4.1.6 The select switch will be initialized (speed adjustment
mode) if the program switch is pressed while selecting
any item using the select switch.
4.1.5 Increment/Decrement Switches
4.1.5.1 The switches are used to increase (Increment Switch) or decrease
(Decrement Switch) the value of the item selected using the
select switch.
4.2 Charging the Battery
Prior to operation the battery must be fully charged according the instructions
below:
4.2.1 Ensure that the site main power is working and that the CanalPro
TM
CL2 is
corded with the proper type of power cord for power available at the site.
4.2.2 Plug the power cord into both the charging base and the wall outlet.
4.2.3 Turn the power switch on the charging base to on and ensure that the
charging LED lights green.
4.2.4 Place the handpiece into the charging base before the first use and fully
charge the handpiece. The charging base LED will be yellow when the
handpiece is not in place. When the handpiece is place in the charging base
the LED will light green indicating that the unit is charging. An audible
buzzer will sound when the handpiece is placed in the charging base.
WARNING!
If there is not audible buzzer or LED light on after
the handpiece is placed in the charging base imme-
diately stop using the CanalPro
TM
CL2 and contact
Customer Service.