SC Scanners Main Board
Page 6 of 21
4. Carefully remove the 2 x M4
screws holding the right end
of the Top Lid Cover. Take
care not to drop the screws
while removing them.
5. Close the Lid Assembly,
making sure both Lid Latches
lock securely.
6. Carefully lift the Top Lid
Cover off from the Lid
Assembly.
7.
Replace
the Top Lid Cover in
the reverse order making
sure the Control Board
Bracket and the Main Board
Cover is located in the
appropriate cut-outs before
lowering the Top Lid Cover
completely and replacing the
2 x M4 screws at either end.
