SC Scanners Main Board
Page 4 of 21
11
1
Tools Required
To maintain the SC42 scanner the tools listed below are required. The tools are generally
available; they are not the responsibility of Colortrac to supply.
1. Wristband
Anti-static and cable.
2. Pencil
HB Lead
3. 7mm Nutdriver.
To remove and fit M5 nuts.
4. 1.5mm Allen Key
or 1.5mm Hex Key
5. Medium Pozi-drive screwdriver.
PZ1 x 80mm length.
6. Small Pozi-drive screwdriver.
PZ0 x 60mm length.
7. Small Flat Screwdriver
3mm blade x 65mm length
(approx.)
8. Medium Flat Screwdriver.
6mm blade
(approx.)
9. Pliers.
Flat nosed pliers, short serrated.
