SC Scanners Main Board
Page 7 of 21
4
Main Board
4.1.1
Important Information.
Before removing the Main Board, following the instructions to retrieve the Motor Speed value by using
the
Distributor’s Utilities area on page 21.
1. Remove the Aluminium EMC
Tape covering the cables to
the Main Board.
2. Remove the 4 x M3 screws
holding the Main Board
Cover to the Lid Assembly.
3. WARNING: Gently lift the
Main Board Cover to reveal
the Mains Connector.
Release the Mains Connector
from the Main Board.
NOTE: Care needs to be taken with the
Suppressor leads on the Main Board cover as
they can be broken with repeated or excessive
movement.
