Page | 8
VERVE LED
Step 8:
To initialize the machine, first open the Print Control Center and get it ready for use. Now, the
machine starts initializing automatically. Firstly, the machine initializes the
Z Axis
, then the sequence is
Y
Axis
→
X Axis
→
Again Z Axis
.
Step 9:
Place the media on the Print Bed.
Step 10:
Switch ON the Print Bed vacuum by pressing the
Bed Vacuum
button available on the front left
side of the machine, as shown below:
Note:
a.
Carriage path must be obstacles free.
b.
Ensure that Z height must be enough to move smoothly over the print bed.
Step 11:
Switch ON the required vacuum chambers by moving the Vacuum Chamber knob, as shown
below:
Fig 6: Switch ON the Vacuum Chamber
Step 12:
Press the
Detect Media Height
button to sense the media height (Refer to Fig 11).
Summary of Contents for VERVE
Page 1: ......
Page 40: ...Page 39 VERVE LED...
