Page | 10
VERVE LED
Loading Media
Follow these steps to load media:
Step 1:
Place the media on the Print Bed.
Step 2:
Switch ON the Print Bed vacuum by pressing the
Bed Vacuum
button available on the front side
of the machine, as shown below:
Fig 8: Turning ON the Bed Vacuum Button
Step 3:
Switch ON the required vacuum chambers by moving the Vacuum Chamber knob, as shown
below:
Fig 9: Switch ON the Vacuum Chamber
The classification of Vacuum Chamber on the Print Bed is shown as below:
Fig 10: Classification of Vacuum Chamber on the Print Bed
Summary of Contents for VERVE
Page 1: ......
Page 40: ...Page 39 VERVE LED...
