Page | 31
VERVE LED
Step 5:
Open Ink Valve using the key provided with the printer.
Step 6:
Click on the
Purge
button to purge ink (Refer to Fig 37).
Step 7:
Spread the cloth tissue on the open palms and insert hands below the print head position, without
touching the Nozzle Plate.
Step 8:
Gently touch the nozzle plate using the clean and fresh cloth tissue at two different positions.
Note
: -
Remember!! NOT TO WIPE
Step 9:
After blotting, remove the tissue
without touching the print head or head plate
as shown
below:
Step 10:
After blotting inks from heads, click on the
Lifter Move To Print Height
button to reset the height
of carriage to printing position (Refer to Fig. 36).
Note
: Please strictly follow the below mentioned instructions:
•
Avoid using the same cloth to clean the Print Head.
•
Cleaning with dry and inferior quality tissue paper will damage the nozzle film by making scars.
•
Strictly use recommended cloth (Contact your dealer for cloth).
•
Don’t
clean hard, just absorb the residue inks on nozzle plate.
•
Softly touch with a lint free bloating cloth (duly wet by cleaning solvent) by changing the cloth
position with respect to nozzle plate.
•
Don
’
t apply force while absorbing residue inks with cloth after purging.
•
Leaving head plate uncapped for longer duration (3-4 days), while printer off, will block nozzles
permanently due to ink solidification.
•
Color bar should always be enabled while printing and idle spray should always be enabled for
long life of the Print Head.
Summary of Contents for VERVE
Page 1: ......
Page 40: ...Page 39 VERVE LED...
