Page | 11
VERVE LED
Step 4:
Set the head height using the
Carriage Lifter
tab, as shown below:
Fig 11: Detecting Head Height
To open the Carriage Lifter screen, click on the
Maintenance
menu and select the
Carriage Lifter
tab.
After this, perform the following steps to adjust the head height:
a.
Enter the X Offset value in the
Detector X-Offset to PrintPos
field.
b.
Enter the Y Offset value in the
Detector Y-Offset to PrintPos
field.
c.
After providing offset details, click on the
Apply
button (Refer to Fig 11).
d.
Place the media on the print bed.
e.
Click on the
Detect Media Height
button to detect head height.
A detailed description of the head height adjustment is given in the
Head Height Adjustment
section.
Summary of Contents for VERVE
Page 1: ......
Page 40: ...Page 39 VERVE LED...
