manualshive.com logo in svg

CollectraMatic LP46, Owner'S Manual, Page: 32 / 36

Share
Download
CollectraMatic LP46 Owner'S Manual Download Page 32

www.winstonindustries.com | 1.800.234.5286

FRYERS

32

WARRANTY AND TERMS AND CONDITIONS

Limited 1 year Warranty (excluding gaskets, lamps, hoses, power cords, glass panels, fryer baskets, 

batteries, and evaporators). Warranty disclaimer for failure to clean. 

WINSTON EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING 

ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY 

OF MERCHANTABILITY. 

Ask us for a complete warranty disclosure or go to: 

www.winstonind.com/documents/4272V089_zap_warranty_agreement.pdf. 

Terms and Conditions of Sale for Winston Industries’ products are available here: 

www.winstonind.com/documents/4272X833_terms_and_conditions_of_sale.pdf.  

Both the Warranty and Terms and Conditions of Sale are integral to this document. 

Buy Winston Parts Online! 

       

Parts and accessories for our products are available to purchase through our online, 

secure site – it’s your one-stop shop for genuine Winston replacement parts. These 

parts are designed specifically for our products and can help you save on costly repairs 

while maintaining valuable warranty coverage.

http://www.winstonparts.com/ 

 

Summary of Contents for LP46





































Reviews:

No comments