Colin BP-S510, Operation Manual

Page: 62 / 137

56
Table 25. NIBP Menu
Level 1 Menu Level 2 Menu or Response
NIBP MENU
Initial Inflation Pressure 120, 140, 160, 180, 200, 220 (mmHg) (Adult)
80, 100, 120, 140 (mmHg) (Neonatal)
BP On alarm On, Off
Smart Clock On, Off
Completion Sound On, Off
Smart Inflation On, Off
(Alarm Limits Adjustment)
▲ Upper Alarm Limit
▼ Lower Alarm Limit
NIBP Alarm Suspend On, Off
Return
Note: Initial Inflation Pressures shown above are for Adult patient mode. In order to set
alarm limits to Neonatal mode, change Patient mode via
Setup Menu
.
Note: The NIBP unit can only be changed by authorized personnel via
Service menu
.
Initial Inflation Pressure
The inflating pressure can be set from 120 to 220 mmHg for adult or from 80 to 140
mmHg for neonatal.
BP on Alarm
If the BP on Alarm is
On
, the monitor will automatically take a measurement when an
alarm condition occur.
Smart Clock
If the smart clock is
On
, the start of measurements will synchronize to the time. For
example, after a measurement made at 10:03 with five-minute interval and then the smart
clock set to On, next measurements will start at 10:05, 10:10 and another.
Completion Sound
When the completion sound is
On
, the monitor sounds beep tones to notify the completion
of the NIBP measurement.
Smart Inflation
When the smart inflation is
On
, the suitable inflation value to the patient is automatically
calculated during the inflation. The inflation value is automatically calculated around the
expected systolic BP value + 45 mmHg.