Colin BP-S510, Operation Manual

Page: 11 / 137

5
INTRODUCTION
WARNING: Patient conditions may result in erroneous readings. If the
measurements are suspect, verify the reading using another clinically accepted
measurement method.
Intended Use for the BP-S510
The BP-S510 is intended to be used to monitor electrocardiography (ECG), heart rate
(HR), noninvasive blood pressure (NIBP) - systolic, diastolic and mean arterial pressures,
functional arterial oxygen saturation (SpO
2
), pulse rate (PR), respiration (RR),
temperature (Temp), invasive blood pressure (IBP) and capnography (EtCO
2
and InCO
2
)
for adult and neonatal patients in all areas of a hospital and hospital-type facilities. Monitor
users should be skilled at the level of a technician, doctor, nurse or medical specialist.
Note: Hospital use typically includes such areas as general care floors, operating rooms,
special procedure areas, intensive and critical care area, within the hospital.
Hospital-type facilities include physician office-based facilities, sleep labs, skilled
nursing facilities, surgical centers, and sub acute care centers.
About This Manual
This manual explains how to set up and use the BP-S510 patient monitor.
Read the entire manual including the
Safety Information
section, before you
operate the monitor.
Identifying the BP-S510 monitor Configurations
The following table identities BP-S510 monitor configurations and how they are indicated.
The model-option number and serial number are located on the back of the monitor.
All information in this manual, including the illustrations, is based on a monitor configured
with the Capnography (EtCO
2
and InCO
2
), IBP and recorder. If the relevant functions do
not exist, please verify your unit configuration.
Configuration REF No. Description
BP-S510 112580 Standard
(ECG, NIBP, SpO
2
, 2-channel Temperature, Respiration)
BP-S510P 112581 St Recorder
BP-S510C 112582 St Capnography
BP-S510PC 112583 St Capno Recorder
S510-IBP 131324 2-channel IBP module