TM
36
6.10 Print from SD Menu
B
“Print from SD”is to select the print file from SD Card to print.
6.10.1 The default documents when out of factory is:
(it will be updated depend on the shipped printer)
6.10.2 Rotate the knob to select the print file that you want to print (.GCO file)
and push the knob to confirm to start to print the file.
Select the print file that you want to print
A
Once the platform temperature and the
nozzle temperature reach the setting
temperature, the printer start to print.
NOTE: The printer just can read the G-code (GCO). You can print .GCO file with
SD Card directly. Otherwise, you can convert .STL file to .GCO file using software
REPETIER-HOST, then save the GCO in SD card to print directly or connect
REPETIER-HOST in the computer to print through USB cable .
However, Print from SD card must disconnect USB cable to computer.
Remark:
Print the file “Z-330.gcode”from the
SD card is to move down the printer
table far from the nozzle tip 330mm
height (Z aixs).
The file can be printed when there is
not printed object on the printer table.
