17
5.6 Install Filament
TM
5.6.8 Insert the filament into the T1 and T2 of the printer head until it reaches
the receiver port of the nozzle.
Then, insert the filament tube to the head to lock.
NOTE: The filament from Extruder1 must be inserted to T1 as Nozzle1;
The filament from Exturder2 must be inserted to T2 as Nozzle 2.
5.6.9 If want to remove the filament tube from the printer head or the extruder,
push down the receiver port lock of the printer head or the exturder and
pull out the filament tube.
Receiver port lock
Extruder1
Extruder2
T1
T2
Filament Tube
