TM
29
6.7 Change Filament
e
c. Heating up nozzle temperature
to the setting temperature
“Prepare”-“Change Filament”has 2 submenus: (as picture a)
1. Load Filament - Load filament into the nozzle automatically and check
the filament flowing status.
2. Unload Filament - Remove filament from the nozzle.
6.7.1 Select“Load Filament”and proceed as below picture b~e.
a
d
c
a. Select the filament material you
are using
d. Once reach the setting temperature,
The default extruder will work to load its
filament into the nozzle and flow out.
Check the filament flowing condition by
refer to 6.3.3.
b. Nozzle start to heat up. Please ensure
the filament is inserted to the hole of
the printer head
b
