25
7.10.2 MEANS OF OPERATION
Procedure:
•
To enter menu navigation, follow process found in Section 3.2 (page 7). Enter
<3.5.toP /
3.5.2.Lo>
submenu, set
<Lo>
parameter value (Lo threshold) after exceeding of which
maximum force is to be registered.
•
Enter 'Peak hold'
<toP>
working mode.
•
From now on the balance registers and holds every single weighment which is above the
<Lo>
threshold, and which is higher than the result of the previous peak hold.
•
If the balance detects mass above the threshold, the highest detected indication is held on
the main display and the pictogram
<Max>
is shown on the right, over the measuring unit.
•
The start of the next process of peak hold measurement is possible only after removing the
load from the weighing pan and pressing
key. This causes returning to the home
screen of
<toP>
mode. Pictogram
<Max>
is automatically deleted.
7.11
TOTALIZING
Working mode enables mass totalizing of weighed ingredients and printing totalizing report on a printer
connected to the balance. It is possible to totalize max. 30 weighing’s (ingredients) in one process.
7.11.1 SETTINGS
•
Accessibility of
<Add>
(Totalizing) mode is declared within
<P3.6.1Acc>,
procedure found
within section 7.2
•
Method of sending data to peripheral device is declared within
<3.6.2.Snn>
, procedure found
within section 7.3.
•
Method of setting automatic printout time for sending data to peripheral device is declared
within
<3.6.3.Int>
, procedure found within section 7.4.
•
Method of setting lo threshold value for automatic operation is declared within
<3.6.4.Lo>
,
procedure found within section 7.5.
7.11.2 MEANS OF OPERATION
Procedure:
•
Enter 'Totalizing'
<Add>
mode. A blinking '▲' pictogram is displayed in the upper part of
the display.
•
If the ingredients are to be weighed in a container, first put it on a weighing pan and next
tare it.
•
Load the weighing pan with first ingredient. When the indication is stable (
pictogram is
displayed) press
key to confirm its mass.
•
Weighing’s sum and '▲' pictogram are displayed continuously.
•
Unload the weighing pan.
ZERO
indication is displayed and pictogram “
▲” starts to blink.
