background image

Models

The Cole-Parmer MSU-400 Series compound microscopes are equipped with HWF 10x/20 mm eyepieces, and are 
available in the following brightfield and phase contrast models. Model 78904-13 includes a fluorescence attachment 
with four 5 W LEDs for fluorescence excitation from 450 to 470 nm (blue), 515 to 535 nm (green), 390 to 400 (violet) and 
360 to 370 nm (ultraviolet; and a UV protection shield.

Please note

: on coleparmer.com you can find the latest updates about MSU-400 models and accessories

Objectives

Eyepiece 

magnification

Objective 

magnification

Total m

magnification

10x

4x

40x

10x

10x

100x

10x

20x

200x

10x

40x

400x

10x

60x

600x

10x

100x

1000x

The total magnification of the microscope can be calculated by multiplying the magnification of the eyepiece with the 
magnification of the objective. The magnifications are displayed in the table. The S40x, S60x and S100x objectives are 
equipped with a spring mount, to prevent damage to the front lens and the slide

Model

Type

Objectives

Working  

distance

Stand

Illumination

Power

Weight

78904-02

Binocular

4x/10x/S40x/

S100x, semi-plan

48 to 76 mm

Rackless integrated 

X-Y mechanical stage

3 W adjustable Kohler 

NeoLED

100–240 VAC, 

50/60 Hz

14.3 lb (6.5 kg)

78904-04

Trinocular

4x/10x/S40x/

S100x, semi-plan

48 to 76 mm

Rackless integrated 

X-Y mechanical stage

3 W adjustable Kohler 

NeoLED

100–240 VAC, 

50/60 Hz

14.7 lb (6.6 kg)

78904-07

Trinocular

4x/10x/S40x/

S100x, plan

48 to 76 mm

Rackless integrated 

X-Y mechanical stage

3 W adjustable Kohler 

NeoLED

100–240 VAC, 

50/60 Hz

14.7 lb (6.6 kg)

78904-10

Trinocular

10x/20x/S40x/

S100x, plan, 

phase contrast

48 to 76 mm

Rackless integrated 

X-Y mechanical stage

3 W adjustable Kohler 

NeoLED

100–240 VAC, 

50/60 Hz

14.7 lb (6.6 kg)

78904-13

Trinocular

4x/10x/S40x/

S100x, plan

48 to 76 mm

Rackless integrated 

X-Y mechanical stage

3 W adjustable Kohler 

NeoLED; four 5 W LED 

Epi-illumination for 

fluorescence

100–240 VAC, 

50/60 Hz

14.7 lb (6.6 kg)

6

Summary of Contents for 78904-02





















Reviews: