Supplementary manual for fluorescence attachment (model 78904-13)
Installation of the fluorescence illuminator and microscope head
Most parts are already mounted on the microscope. Only two parts are packed separately. The microscope head (B)
and the fluorescence illuminator (F).
A.
Eyepieces
B.
Microscope head
C.
Fluorescence attachment
D.
Turret for fluorescence filters
E.
Protection screen
F.
Fluorescence illuminator
G.
Turret for LEDs
Installation steps
•
Take the microscope with fluorescence attachment, fluorescence illuminator and head from its packaging
•
Place the head on the fluorescence attachment and fasten the screw (on the right side of the microscope) with a
hexagon wrench
•
Install the eyepieces into the eyepiece tubes if these are not already installed (fig 1, A)
•
Mount the fluorescence illuminator to the back of the fluorescence attachment and fasten the screw with a
hexagon wrench
•
Plug the power cord into the power supply, but don’t turn it on yet
1
14