Cognex In-Sight 5000 Series, Installation Manual

Page: 27 / 48

5604 Line Scan Vision System Specifications
Table 3-4: 5604 Line Scan Vision System Specifications
Specification 5604/5614
Minimum Firmware Requirement In-Sight version 4.4.3
Job/Program Memory 128MB non-volatile flash memory; unlimited storage via remote network
device.
Image Processing Memory 256MB SDRAM
Sensor Type 1-inch CCD
Sensor Properties 14.3 mm x 14µm active area, 14µm x 14µm sq. pixels.
Maximum Resolution (pixels) 1024 x 1 (CCD); 1024 x 8192 (up to 8192 lines for full resolution image).
Acquisition Line Scan integration.
Bit Depth 256 grey levels (8 bits/pixel).
Lines Per Second 44K lines per second.
1
Lens Type C-mount
Lens Cover View Port Material Clear plastic with an abrasion-resistant coating on the exterior side.
Trigger 1 opto-isolated, acquisition trigger input. Remote software commands via
Ethernet and RS-232C.
Discrete Inputs None built-in. Additional inputs available using a compatible I/O module.
(For more information, refer to
I/O Modules on page 4
.) Unlimited inputs
when using an Ethernet I/O system.
Discrete Outputs 2 built-in, high-speed outputs. Additional outputs available using a
compatible I/O module. (For more information, refer to
I/O Modules on
page 4
.) Unlimited outputs when using an Ethernet I/O system.
Encoder Inputs 2 built-in, encoder inputs for use with a 24VDC signal.
Status LEDs Power, Network Status, Network Traffic, 2 user configurable.
Network Communication 1 Ethernet port, 10/100/1000
2
BaseT with auto MDIX. IEEE 802.3 TCP/IP
protocol. Supports DHCP (factory default), static and link-local IP address
configuration.
1588 Support
Timestamp Resolution: 8ns
Synchronization Accuracy Through Transparent Clock: 5µs
Serial Communication RS-232C when connected to the Breakout Cable or a compatible I/O
module. (For more information, refer to
I/O Modules on page 4
.)
Power Consumption 24VDC ±10%, 600mA maximum.
Material Die-cast aluminum housing.
Finish Painted/Powder coat (back plate).
Mounting Eight M4 threaded mounting holes (four front and four back).
Dimensions
134.4mm (5.29in) x 124.1mm (4.88in) x 61.4mm (2.42in) with lens cover
installed.
53.2mm (2.09in) x 124.1mm (4.88in) x 61.4mm (2.42in) without lens
cover installed.
Weight 585 g (20.6 oz.) Lens cover installed, without lens.
1
The number of image sensor rows are configurable and can be set within the In-Sight Explorer software. Decreasing the number of rows will
increase the number of frames per second acquired by the vision system. Refer to the AcquireImage topic in the
In-Sight
®
Explorer Help file
for more information.
2
To ensure reliable communication using 1000 BaseT operation, the Ethernet cable must not exceed 75 meters (from the vision system to the
endpoint).
Specifications
15