Cognex In-Sight 5000 Series, Installation Manual

Page: 26 / 48

Specification 5603/5613 5600/5610 5605/5615
Mounting Eight M4 threaded mounting holes (four front and four back).
Dimensions
99.9mm (3.93in) x 124.2mm (4.89in) x 61.4mm (2.42in)
with lens cover installed.
60.1mm (2.37in) x 124.2m (4.89in) x 61.4mm (2.42in)
without lens cover installed. 134.4mm (5.29in) x 124.1mm
(4.88in) x 61.4mm (2.42in) with lens
cover installed.
53.2mm (2.09in) x 124.1mm
(4.88in) x 61.4mm (2.42in) without
lens cover installed.
Weight 463 g (16.3 oz.) Lens cover
installed, without lens. 409 g (14.4 oz.) Lens cover
installed, without lens. 538 g (19.0 oz.) Lens cover
installed, without lens.
Operating
Temperature (non-
circulating air)
0°C to 45°C (32°F to 113°F)
1
Operating
Temperature
(circulating air)
0°C to 50°C (32°F to 122°F)
2
0°C to 50°C (32°F to 122°F)
3
0°C to 50°C (32°F to 122°F)
4
Storage Temperature -30°C to 80°C (-22°F to 176°F)
Humidity 95%, non-condensing (Operating and Storage)
Protection IP67 (with appropriate lens cover properly installed).
Shock (Shipping and
Storage) 80 G Shock with 150 gram lens attached per IEC 68-2-27.
Vibration (Shipping
and Storage) 10 G from 10-500 Hz with 150 gram lens per IEC 68-2-6.
Regulatory
Compliance CE, FCC, KCC, TÜV SÜD NRTL, RoHS
1
The vision system should be mounted with sufficient clearance on all sides to allow air circulation around and through the cooling posts on the
black heat sink.
2
Additional cooling from a fan is recommended for operation above 40°C. For operation up to 50°C, there must be ≥16 CFM of air moving
through the cooling posts on the black heat sink.
3
Additional cooling from a fan is recommended for operation above 40°C. For operation up to 50°C, there must be ≥4 CFM of air moving
through the cooling posts on the black heat sink.
4
Additional cooling from a fan is recommended for operation above 40°C. For operation up to 50°C, there must be ≥16 CFM of air moving
through the cooling posts on the black heat sink.
14