Cognex In-Sight 5000 Series, Installation Manual

Page: 13 / 48

Introduction
The In-Sight
®
vision system is a compact, network-ready, stand-alone machine vision system used for automated
inspection, measurement, identification and robot guidance applications on the factory floor. All models can be easily
configured remotely over a network using an intuitive user interface.
Support
Many information resources are available to assist you in using the vision system:
l
The In-Sight
®
Explorer Help and EasyBuilder Help files, provided with In-Sight Explorer software.
l
On-demand training: http://www.cognex.com/on-demand-training.aspx .
l
The In-Sight online support site: http://www.cognex.com/Support/InSight .
Standard Components
The vision system is shipped with the standard components listed below.
Note : Cables are sold separately.
Table 1-1: Standard Components
Component
In-Sight 5100/5110
In-Sight 5100C
In-Sight 5400C
In-Sight 5400/5410 In-Sight 5401/5411
In-Sight 5403/5413
In-Sight 5600/5610
In-Sight 5603/ 5613
In-Sight 5400S/5410S
In-Sight 5400CS
In-Sight 5403S
In-Sight 5604/5614
In-Sight 5605/5615
50mm Lens Cover Kit
(P/N 800-5842-xR) X X
80mm Lens Cover Kit
(P/N 823-0133-xR) X
IP68 Lens Cover Kit
(P/N 800-5892-xR) X
Thread Guard
(P/N 370-0361) X X X X
Mounting Screw Kit
(P/N 800-5843-xR) X X X X
Table 1-2: Standard Components Descriptions
Component Description
Vision System Provides image acquisition, vision processing, job storage, serial and Ethernet
connectivity and discrete I/O.
Lens Cover Kit (includes
lens cover and O-Ring) Provides environmental protection for the lens.
Thread Guard Protects the In-Sight vision system lens cover threads when the lens cover is not used.
Remove the thread guard prior to installing the lens cover.
Mounting Screw Kit Includes M4 screws for mounting the vision system (quantity 4).
1