Cognex In-Sight 5000 Series, Installation Manual

Page: 35 / 48

I/O Module Cable Specifications
The I/O Module cable connects the vision system directly to a compatible In-Sight I/O module via the DB15 connector.
When the I/O module is used, all power and communication lines used by the vision system are connected using the I/O
Module cable.
Table 3-10: I/O Module Cable Pin-Out
P1 Pin# Signal Name P2 Pin#
1 +24VDC 1
2 2
3 TRIGGER- 3
4 HS OUT 0 4
5 HS OUT 1 5
6 RS-232 RECEIVE (RxD)
(In-Sight 5604 Only: Encoder A) 6
7 RS-232 TRANSMIT (TxD)
(In-Sight 5604 Only: Encoder B) 7
8 24V COMMON 8
Note :
l
Cables are sold separately.
l
Access to the encoder inputs on the In-Sight 5604 Line Scan are not supported by the CIO-MICRO or CIO-
MICRO-CC I/O module.
l
Refer to your specific I/O module installation manual for more connection information.
Specifications
23