Specifications
3.4 Connector and Terminal Block Specifications
3.4.1 RS-232 Remote Connector
The RS-232 Remote connector transmits serial data between the I/O Expansion Module and a
remote device. Status LEDs are provided for the TxD and RxD lines on this port. These LEDs will
illuminate only when there is activity on the associated line. Table 3-7 identifies the signal
assignment for each pin on the RS-232 Remote connector.
Table 3-7: RS-232 Remote Connector Pin Assignments
PIN #
ASSIGNMENT
PIN #
ASSIGNMENT
PIN #
ASSIGNMENT
1 No
Connect 4 No
Connect 7 CTS
2 TxD 5 GND 8 RTS
3
RxD
6
No Connect
9
No Connect
3.4.2 In-Sight Camera Connector
The In-Sight Camera connector transmits discrete I/O and serial data between the sensor and
the I/O Expansion Module, as well as supplying power to the sensor. Status LEDs are provided
for the TxD and RxD lines on this port. These LEDs will illuminate only when there is activity on
the associated line. Table 3-8 shows the signal assignments for each pin on the In-Sight Camera
connector.
Table 3-8: In-Sight Camera Connector Pin Assignments
PIN #
ASSIGNMENT
PIN #
ASSIGNMENT
PIN #
ASSIGNMENT
1 +24VDC 6 RxD 11 GND
2 TRG
+ 7 TxD 12 GND
3 TRG
– 8 GND 13 GND
4
High-Speed Output 0
9
GND
14
GND
5
High-Speed Output 1
10
GND
15
GND
18
Summary of Contents for In-Sight 1450
