Cognex In-Sight 1450, Installation And Reference Manual

Page: 23 / 45

3 Specifications
In this section…
3.1 General Specifications .................................................11
3.2 Acquisition Trigger Input ..............................................12
3.3 Input and Output Specifications ...................................14
3.4 Connector and Terminal Block Specifications..............18
3.5 Dimensions ..................................................................19
3.1 General Specifications
Table 3-1: I/O Expansion Module General Specifications
SPECIFICATION DESCRIPTION
SYSTEM COMPATIBILITY
In-Sight 1000 series/1700 series/3400/4000 series/5000 series.
TRIGGER
1 opto-isolated, acquisition trigger input.
INPUTS
8 discrete inputs (general-purpose).
I/O
OUTPUTS
10 discrete outputs (2 high-speed, 8 general-purpose)
1000 series/3400/4000series/5000 series.
8 discrete outputs (general-purpose) 1700 Series Wafer Reader.
COMMUNICATIONS SERIAL
1 RS-232C port (1200 to 115,200 baud rates).
RxD, TxD, and Flow control (RTS/CTS).
STATUS LEDS
1 each for power, acquisition trigger, inputs, and outputs.
2 each for Camera and Remote RS-232.
HOUSING
Black plastic.
MOUNTING
#3 DIN-rail (35 mm).
DIMENSIONS
150 mm (5.89 in) x 83.1 mm (3.27 in) x 47.0 mm (1.85 in).
TERMINAL
BLOCK
26 to 16 AWG.
Maximum torque 0.3 N-m (2.7 in-lb).
MECHANICAL
WEIGHT
164.4 g (5.8 oz).
POWER
24VDC ± 10%, 1.25 Amps, 30W supply*.
TEMPERATURE
0 to 50°C (operating), -10 to 65°C (storage).
ENVIRONMENTAL
HUMIDITY
10 to 90%, non-condensing (Operating and Storage).
CERTIFICATIONS
CE.
* Maximum draw when I/O Expansion Module supplies power to an In-Sight 4100 sensor, and when all inputs, outputs,
and LED indicators are in use. Draw will be less than 30W under typical usage.
11