Installation
2.2 Configuring the In-Sight Sensor
Before the I/O Expansion Module can be used, the In-Sight sensor’s settings must be configured
to recognize the availability of the additional inputs and outputs, as well as the added serial
hardware handshake capability. The I/O Expansion Module may be configured using In-Sight
Explorer. Refer to Appendix A on page 21 for details on configuring the I/O Expansion Module
using the In-Sight 3400 embedded GUI or In-Sight PC Host.
2.2.1 I/O Configuration Using In-Sight Explorer
1. P
hysically connect the I/O Expansion Module to the In-Sight sensor, as described
previously in Section 2.1.
2.
Open the In-Sight Explorer program and log on to the sensor.
3
.
From the
Device
menu, select the
Discrete I/O Settings
submenu. Select the
Output
Settings
option (Figure 2-5).
Figure 2-5: Accessing the I/O Output Settings
8
Summary of Contents for In-Sight 1450
