Mounting
The device can be mounted on a DIN rail according to EN 60715 (TS35) or screwed onto a mounting plate. Both
composite and individual assembly are possible.
Mounting Module Composites
The TBNN-S0…
1
adapters can be used to build module composites for group assembly.
Mounting on Mounting Plate
The devices are fixed on a pre-drilled mounting plate with two M4 screws. The spacers TBNN-S0-STD
2
are necessary for
mounting module composites.
Mount the modules or the module composites according to the image below.
1. Unlock the cover flap with a flat tool (e.g. screw driver).
2. Open the flap completely.
3. To join the DMA-EZCCM-001 module and the spacer, insert the key of the spacer into the slot of the DMA-
EZCCM-001 module.
1
TBNN-S0 is not a Cognex accessory, please contact Turck for more information.
2
TBNN-S0-STD is not a Cognex accessory, please contact Turck for more information.
11
About DMA-EZCCM-001
Summary of Contents for DMA-EZCCM-001
