X1
Power feed
X2
Continuation of the power to the next node
V1
Power Supply 1 (including supply of electronics)
V2
Power supply 2
Note
: The system voltage (V1) and the load voltage (V2) are fed in and monitored separately. In case of an
undercut of the admissible voltage, the connectors are switched off according to the module's supply concept. In
case of an undervoltage at V2, the LED PWR changes from green to red. In case of an undervoltage at V1, the led
is turned off.
Connecting Digital Sensors
The DMA-EZCCM-001 module is provided with two 5-pin M12 connectors for connecting digital sensors, which can act
as trigger to the DataMan readers or general inputs to read out via fieldbus.
Connect the sensors to the device according to the pin assignment shown below.
18
About DMA-EZCCM-001
Summary of Contents for DMA-EZCCM-001
