l
Write in User Data the Input String you want to use eg. SET INPUT-STRING.VALUE <STX>123<ETX>
l
Trigger soft event
Advanced Features
l
Reading Input Channel
l
The DMA-EZCCM-001 has two input channels and each has 2 input lines, on pin 2 and pin 4.
l
Each of the 4 inputs can be traced back to the PLC so that it tracks any signals coming from the conveyor.
l
Blocking ST connection
l
Once the Setup tool will tunnel through the device to connect to a reader, the serial connection for the
industrial network connection will be disrupted.
l
To avoid this “Force RUN mode” bit from “Trigger Control” can keep the PLC connection alive and disable
the possibility to connect over Setup Tool.
30
Getting Started
Summary of Contents for DMA-EZCCM-001
