Gob1
This function allows the gobos on gobo wheel 1 (rotating gobos) to be either cen-
tred in the optical path of the projector or to be utilised in a proportional manner via
DMX 512
signal, thus allowing the creation of split gobos.
1) Press the
menu
button.
2) Press the
+
or
-
button until the display shows
Gob 1
(for gobo).
3) Press the
enter
button to confirm your selection; the display whill show
Strd
(for
standard) which corresponds to the automatic centring of gobos on gobo wheel
1 in the optical path of the projector.
4) Press the
+
or
-
buttons; the display will show
SPEc
(for special) which corre-
sponds to the proportional rotation of gobo wheel 1.
(a variation in the
DMX 512
signal corresponds to a proportional rotation of
gobo wheel 1, thus allowing gobos from this wheel to be positioned out of cen-
tre in the optical path of the projector)
5) Press the
enter
button after either step 3 or 4 to confirm your choice of the man-
ner in which gobo wheel 1 will respond to the DMX signal.
channel
function
type of control
effect
decimal
10
gobo 1 selection
standard (Strd)
step
no gobo
0-30
step
gobo 1
31-61
step
gobo 2
62-91
step
gobo 3
92-123
step
gobo 4
124-151
proportional
gobo wheel rotate continously, speed from min to max
152-255
NOTE: channel 10 function can be varied selecting gobo standard/special function on the back function display
10
gobo 1 selection
special (SPEc)
step
no gobo
0-10
proportional
proportional gobo wheel rotation 360° from no gobo to the last
gobo
11-151
proportional
gobo wheel rotate continously, speed from min to max
152-255
function display
function display
function display
