4) Press the
+
or
- button
; the display will show
ccW
(for counterclockwise).
5) Press the
enter
button after either step 3 or 4 to confirm your choice of direction.
oPto
This function allows the sensors which read the instantaneous pan and tilt positions
of the fixture to be switched on or off.
With the sensors activated (
opto ON
) the projector will automatically return to its
correct position in case it is accidentaly moved out of position.
With the sensors deactivated (
opto OFF
) the projector will not return automatically
to its correct position if it is accidentaly moved out of position.
NOTE:
there will be a noticeable difference in the projector at startup; with
opto
ON
the reset procedure will take but a few seconds; the reset can last up to a minu-
te with the
opto oFF.
1) Press the
menu
button.
2) Press the
+
or
-
button until the display shows
oPto
3) Press the
enter
button to confirm your selection; the display will show
on
(opto
activated).
4) Press the
+
or
- button
; the display will show
oFF
(opto deactivated).
5) Press the
enter
button after either step 3 or 4 to confirm your choice.
N.B.
We recommend that the opto be deactivated only if it is obviously defective
and requires replacement.
function display
function display
function display
function display
