lamp
This function allows for the on/off control of the lamp via
DMX 512
signal, or for
the permanent on (disenabling DMX control of this function) of the lamp.
1) Press the
menu
button.
2) Press the
+
or
-
button until the display shows
LAMP
(for lamp).
3) Press the
enter
button to confirm your selection; the display will show
Strd
(for
standard) which corresponds to the standard configuration whereby the lamp
can be turned on remotely by bringing channel 20 up to 100%, or off at 0%.
4) Press the
+
or
- button
; the display will show
on
(for lamp on). At this setting,
the lamp will remain on regardless of the level set on channel 20.
5) Press the
enter
button after step 3 or 4 to confirm your selection.
coLo
This function allows the colour wheel to be used in a proportional manner via DMX
512 signal.
1) Press the
menu
button.
2) Press the
+
or
-
button until the display shows
coLo
(for colour wheel).
3) Press the
enter
button to confirm your selection; the display will show
Strd
(for stan-
dard) which corresponds to the automatic centring of the colours on the colour wheel
in the optical path of the unit. A change in the DMX 512 signal corresponds to a colour
change by the
CF 1200 H
ard
E
dge
.
4) Press the
+
or
- button
; the display shows
SPEc
(for special) which corresponds
to the proportional selection of the colour on the colour wheel (split colours are
thereby possible)
function display
function display
function display
function display
function display
function display
