3) Press the
enter
button to confirm your selection; the display will turn off, reap-
pearing when any button is next pressed.
3) Press the
+
or
-button to
confirm your selection; the display will show
oFF
(for
display off).
tESt
This function allows for a test sequence to be carried out on the respective motors of
the unit in the absence of any DMX signal.
1) Press the
menu
button.
2) Press the
+
or
-
button until the display shows
tESt
(for test).
3) Press the
enter
button to confirm your selection; the display will show
t 01
(for
test number 1). Press the
+
or
-
buttons for subsequent tests from
t 01
to
t 12
.
In these tests the projector simulates the reception of a DMX 512 signal which is
increasing from 1 to 255 on the selected channel.
t 01
= movement in the X-axis
t 02
= fine movement in the X-axis
t 03
= movement in the Y-axis
t 04
= fine movement in the Y-axis
t 05
= opening/closing of the dimmer
t 06
= opening/closing of the blackout/strobe shutter
t 07
= opening/closing of the iris diaphragm
t 08
= movement of the zoom system
t 09
= focus
t 10
= selecting gobo 1
t 11
= rotation gobo 1 360°
t 12
= rotating gobo 1& and indexing of position
t 13
= selecting gobo 2
t 14
= selecting effect
t 15
= rotating effect
t 16
= rotating colour wheel 1
t 17
= cyan
t 18
= magenta
t 19
= yellow
t 20
= no function
4) Press the
enter
button to confirm your selection of test to be carried out.
function display
function display
function display
