Victory 3_en.pdf http://en.codelight.com.cn
32
7.7.7.
Flash Mode
The playback key will be used as a flash when the function is opened. The function can only be used by using the
physical keys of the fixed playbacks.
Note: The fixed playbacks activated on the touch screen do not have the flash function.
7.7.8.
Run mode of Fixed Playback
Pressing the option
[FixedPLBK]
can switch the output mode of the fixed playbacks. When the option is in
[Normal
Mode]
, different fixed playbacks can run together. While the option is in
[Solo Mode]
, the last active fixed playback
will replace the previously running one.
7.7.9.
Rename the Playback
Select a playback in the list can rename the playback by option
[Playback Legend]
.
The name of the playback will be shown at the bottom of the screen. You can press the
[Func]
key to switch display
the key-playback name or attribute name on the screen.
7.7.10.
Release Mode
You can set the release mode for playback as follow:
[Freeze All Attribute]
---- All attribute channels will be held except HTP channel;
[Release All Attribute]
---- Resume all attributes to the beginning state;
[Release Only Pan/Tilt]
---- Resume Pan and Tilt to beginning state and hold other attribute channels
except for HTP channel.
7.7.11.
Direction
If it is a Cue-lists playback, press
[Direction]
can set the Cue-lists direction to
‘forward’
or
‘backward’
.
7.7.12.
Run Mode
If there is a Cue playback, you can select one of the modes:
Mode=Time
----
Enable both HTP and LTP times. If the times are set to 0, the value of the HTP channel
depends on the fader position.
Mode=Fader
----
Disables any set times. The values of HTP and LTP channels depend on the fader
position.
7.7.13.
Loop Mode
If there is a Cue-lists playback, press
[Loop run]
option can change the run mode into
[Stop in Last Step]
.
7.8.
Reload a Cue
The controller allows you to reload the attribute values of fixtures from one of the whole Cue-lists.
You may load the values of the needed attributes from one of the cues by option
[Load Cue to
Program]
after selecting
[Playback Parameters]
.
You may find all indicators of attribute keys are on. Pressing the attribute keys to cancel selected so
that the non-selected attributes will not be loaded in. Then select the playback that needs to be reloaded.
If there is a cue playback, the fixtures included in the cue will be selected automatically.
If there is a Cue-lists playback, you may select one of the cues and then select
[Load Selected Cue]
. It
will return to
‘LIVE SHOW’
and the
fixtures included in the cue will be
selected automatically.
