Cocoon HE161192, Instruction Manual

Page: 11 / 40

11
.
AFTER SALES SUPPORT
1300 663 907 CUSTOMERCARE@WINPLUS.COM.AU MODEL: HE161192
We recommend Cura, as it uses a simple interface and includes a large
amount of support material.
Setup 3D Printer Touch
It’s important to set up your printer before every print. We’ve included some
steps on page 12 in section 1.3 ‘Good 3D Printing Practices’ for you to
quickly refer to each time.
3D Printing Process
Now that you’ve loaded a GCODE file onto the printer, it will commence
heating up the Extruder and Heated Print Bed, then start printing. While
printing, the nozzle will move along the X and Y axis as each layer is printed.
This can take some time, depending on the size of the 3D model, print speed of the 3D Printer Touch
and resolution of each layer.
Here is an example of how size, infill, and resolution can affect printing time:
Dimensions:
62.5 x 25.75 x 67.75mm 70 x 70 x 140mm
Infill:
20% 0% 20% 20%
Resolution:
2mm 2mm 2mm 1mm
Print Time:
53min 39min 6hr 40min 13hr 12min
Filament Used:
4m 2.54m 45m 45.67m
3D Printed Object
Once the printer has completed all the layers, you will have a 3D Printed Model.
The Cocoon Create 3D Printer Touch is compatible with a broad range of filament types and is
capable of printing 3D models ranging from small and simple to complex objects with moving parts.
What you print is limited only by your imagination.
INTRODUCTION
.