background image

3

4

SAFETY PRECAUTIONS

Warning – To prevent low temperature burn, electrical shock, fire accident or human 
body injuries. 
·  

Children, the aged or disabled who are using or come closer to the Product must be closely 

guarded, children should not be allowed to use or be exposed to the Product. Do not let the 
children staying in the room equipped with the Product alone. 

·  

For children and the aged users who are unable to adjust the temperature by themselves 

independently, help them to adjust temperature of the seat, water and air to proper level.

·  

Do not allow the children playing about the device/equipment.

Caution for use:

·  

Be sure to install the Product correctly in compliance with instructions for/specification of 

installation.

·  

The user must have the Product well grounded in accordance with the Instruction Manual 

before energizing/power connection.

·  

Do not place any combustible objects on the product, e.g.: candle, glowing cigarette or 

similar objects.

·  

Please do not use/operate the Product in any of following cases: power wires, plugs and the 

Product is/are damaged; the Product is not working; the Product is dropped into the water. 

·  

Do not use the Product outdoor or in an area where a particle spraying equipment is in 

operation or where oxygen supply operation is ongoing. 

·  

Be sure to use/operate the Product strictly in compliance with methods/instructions 

specified in the Manual, never use accessories Coburg recommends not to use.

·  

Please ensure to use water inlet hoses and angle valves enclosed with the Product delivered 

instead of any used hoses and angle valves. 

·  

While using/operating the Product, do not lean your back over the cover to avoid any 

damage of the Product.   

·  

To keep the power wire away from any heating surface. 

·  

Prevent water from splashing onto the power plug. 

·  

Do not drop or insert any objects into the pipeline/openings.

·  

Please do not contact the heated seat by skin directly for long time to avoid low tempera

ture burn. 

·  

The Product can only be repaired by authorized competent staff, never attempt to fix/repair 

the Product by yourself or you will lose your entitlement to the quality warranty service.  

·  

In case of any broken power wires, for sake of safety, the User must contact and request the 

manufacturer, its repair/maintenance department or equivalent department to assign 
competent personnel to replace such broken wires.  

SAFETY PRECAUTIONS

Important! Hazard of damaging the Product or other properties. 

·  

Do not install the Product at where with potential exposure to splashing water.

·  

Do not install the Product at any place involving over-high humidity where moisture/wa

ter vapor might condensate on surface of the Product. Please keep the area where the 
Product is/to be applied well ventilated to eliminate potential damage of electronic 
elements/components.

·  

To push or pull water hose joint(s) by force violently might result in trouble of water 

leakage. 

·  

Do not apply force against the nozzle over than necessary or the Product might be 

damaged.

·  

Please ensure to well insulate the water pipe as water contained in it might get frozen. Any 

water staying in the Product might get frozen in winter, please be sure to heat the Product 
up to ambient temperature prior to reinstatement or usage.

·  

Do not get power connected until completion of installation, otherwise, Product failure 

might be encountered.

Note: In warm days, heat protector might be disabled in process of storage or transportation 
resulting in failure of the Product. Please ensure to warm the Product up to ambient temperature 
before reinstatement or operation. 

    

While using electrical appliances, especially with presence of children, people 
shall follow instruction of general safety precautions including:

Hazard – to reduce hazard of exposure to electrical shock:
·  

Do not put this equipment/device at any place/location where it might be dragged or 

pulled unexpectedly and dropped into bath tube or water sink.

·  

Do not put it or let it dropping into the water or other liquid. 

·  

Do not touch the Product dropped into the water, unplug it immediately instead. 

Please keep the Instruction Manual in well custody!

CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT DISASSEMBLED THE 
                    SEAT. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER 
                    SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warning: Hazard of electrical shock, fire or human body injuries. The Product 
MUST be safely earthed/ grounded.
This Product is only allowed to be connected to electric circuit of AC 
220-240V 50-60HZ and 10A, equipped with ground fault/failure breaker or 
earth leak protector.

Warning: Hazard of getting electrical shock or damaging the Product. Do not 
put the Product in the water.

Summary of Contents for CBD1805













Reviews: