6
QUICK START GUIDE
■
Initial usage
Install the seat and plug in as per installation instructions. It will automatically initialize until
the night light flickers off.
■
Normal usage
• Have seated
The deodorization function opens automatically, it can be stopped by press “Stop” key.
You can change the seat temperature to appropriate shift first.
• After toilet
Select Female or Rear mode, adjust water pressure, temperature and nozzle position to
appropriate shift and then wait for flushing over, or you can stop the flushing by pressing
“Stop” key.
• After flushing
To enable Warm Air Drying function, adjust the appropriate shift.
• Leave away
It will enter standby mode automatically.
■
Remote Control Unit Description
All features of the bidet can be controlled with the remote control.
STOP/AUTO:
Press once for stop; Press and hold on 3seconds to enter automatic mode.
CHILDREN:
Enter Children mode. ( For CBD1807)
ENEMA:
Enter Enema defection. ( For CBD1808)
FEMALE/REAR PRESSURE:
Press once to turn on Female or Rear mode, press again to
change the shift.
WATER TEMP.:
Change the temperature of water
OSCILLATE/CLEAN:
Turn on or off the oscillating clean function
NOZZEL POSITION:
Adjust nozzle position
DRYER:
To enable Warm Air Dying function
SEAT TEMP.:
Change the seat temperature
DEODORIZER:
Turn on or off the deodorization function
NGHT LIGHT:
Turn on or off the night light
5
CONTROL PANEL
CBD1808 Control Panel
CBD1807 Control Panel
