18
16
Filter screen
Nipper pliers
■
MAINTENANCE OF THE PRODUCT LEFT IDLE FOR A LONG
TIME
·
If the Product is to be left idle for a long time, unplug the power, close the angle valve,
disassemble the water supply hose and drain it off.
·
Before using the Product that has been left idle for a long time again, please perform several
cycles of rinsing till the internal pipes are thoroughly cleaned.
MAINTENANCE AND CLEANING
15
■
Cleaning Filter Screen
Note: Important! Hazard of damaging the Product.
Be sure not to cause any damages to
joints/connections.
Please clean or replace filter screen promptly if you notice that the water flow is decreasing
or there’s no water flow.
·
Close water supply valve.
·
Press the “Release” key and keep moving the bidet forwardly till it’s detached from the
mounting plate.
·
Rotate the water supply pipe to remove it out of the pedestal.
·
Disassemble the water supply pipe.
·
Take the filter screen out through the water inlet port carefully with help of nipper pliers (As
shown in figure).
·
Clean the filter screen with a soft bristle brush.
·
Reinstate the filter screen.
·
Reinstate the water supply pipe properly by ensuring alignment of threads carefully.
·
Check all the connections and joints and make necessary adjustments to prevent any
leakage.
·
Open water supply valve.
MAINTENANCE AND CLEANING
