7
USAGE/OPERATION METHOD
To enable Female Mode, with the user ready sitting on the seat, press the
“Female” key, current rinsing intensity will also be displayed and any
ongoing warm air blowing operation will be disabled promptly.
With the Female Mode enabled, press the Female key further will allow the
user to adjust/modify rinsing intensity for three shifts (Shift 1, Shift 2 and
Shift 3).
To enable Rear Mode, with the user ready sitting on the seat, press the “Rear”
key, current rinsing intensity will also be displayed any ongoing warm air
blowing operation will be disabled promptly.
With the Rear Mode enabled, pressing the Rear key further will allow the
user to adjust/modify rinsing intensity for three shifts (Shift 1, Shift 2 and
Shift 3).
To enable Children Mode, with the user ready sitting on the seat, press the
“Children” key, series steps of operation including rear rinsing for 2 minutes,
warm air blowing for 3 minutes and deodorization will be implemented
automatically with water pressure maintained at low level, water tempera-
ture at medium level (Shift 3) and nozzle at forward position.
To adjust water temperature, press the “+/-“ key and the user may adjust
water temperature for five shifts (Shift 0, 1, 2, 3, 4 and 5).
To disable function of rinsing, air warming and deodorization, press the
“Stop” key.
To enable the Automatic Mode, press the “Stop” key and hold for a while
for CBD1807/CBD1808, series steps of operation including rear rinsing for 2
minutes, warm air blowing for 3 minutes and deodorizing will be
implemented automatically with water pressure, temperature and position
of the nozzle maintained at middle level.
To enable Defecation Enema Mode, with the user ready sitting on the seat,
press the “Defaecate” key and the body should be in a relaxed state, current
rinsing intensity will also be displayed any ongoing warm air blowing
operation will be disabled promptly.
8
USAGE/OPERATION METHOD
To adjust nozzle position in the Rear Mode or Female Mode, press the
“Nozzle position” key, it will allow the user to adjust nozzle position for three
shifts, i.e. forward shift, middle shift and rear shift, sequentially in circles.
To enable Warm Air Drying function, with the user sitting on the seat, press
the “Dryer” key. Further press on the key will allow the user to adjust air
temperature for three shifts, i.e. low, medium and high, sequentially in
circles.
To disable Warm Air Drying Function, press the “Stop” key.
To enable the Deodorization Function, press the “Deodorization” key, the
Diatomic Alcohol Deodorizing and Purifying Function will be enabled at the
same time (only in case of CBD1807/1808). Press the “Deodorization” key or
“Stop” key again, you will disable the Deodorization Function.
To adjust seat temperature, with the user sitting ready on the seat, press the
“Seat temp. control” key, it will allow the user to adjust the temperature for
four shifts, i.e. Off, Low, Medium and High, sequentially and followed by
recycling.
*CBD1805 is not supported to adjust seat temperature. The method of
operation: turn on the power supply after turn off it for 5 secs first, and then
turn the knob backward holding on 5 secs until heard the "DING" sound,
the seat temperature can be switch on/off.
With the Rear Mode or Female Mode enabled, press the “Oscillate Clean” key
and the user may change position of the nozzle forwardly or backwardly, press
the “Oscillate Clean” key again, the user may disable/stop “Oscillate Clean”.
To clean the nozzle, press the “OSCILLATE” key or press the “Cleaning” key
and hold for a while for CBD1807/CBD1808 after flipping up the lid and the
seat providing that there’s no one sitting on the seat, the nozzle will be
self-cleaned and extended out, you may clean the nozzle with soft bristle
brush then. Upon completion of nozzle cleaning process, press the “Stop”
key, the nozzle will be retracted backwardly or you may just wait for
automatic retraction operation.
