14
■
Remove Seat cover
·
Close water supply valve
·
Enable washing function of the bidet to depressurize the water supply pipe
·
Unplug the power
·
Disconnect water supply pipe and tees.
·
Press and hold on the “Release” key (shown in the figure)
·
Keep moving the bidet forwardly till the lid is detached from the mounting plate.
MAINTENANCE AND CLEANING
Mounting plate
Release key
13
■
Cleaning Nozzle
·
Flip open the lid and seat.
·
Press the “Sterilization” key and hold for a while till tube of the nozzle is fully extended,
then clean the nozzle with a soft bristle brush.
·
After the nozzle is cleaned, press the “Sterilization” key and hold for a while till the nozzle
tube retracts, or just wait for it.
Note:
The nozzle can only be extended out for cleaning purpose when there’s no user sitting
on the seat.
Nozzle in extended positions
MAINTENANCE AND CLEANING
