9
USAGE/OPERATION METHOD
Instruction About Water Temp. Shift Configuration
Shift 2 (Medium and low shift)
Two indicators lights on.
Shift 1 (Low shift)
One indicator lights on.
Shift 0 (OFF)
No indicator lights on.
Shift 3 (Medium shift)
Three indicators lights on.
Shift 4 (Medium and high shift)
Four indicators lights on.
Shift 5 (High shift)
Five indicators lights on.
Instruction About Other Shift Configuration
Shift 2 (Medium shift)
Two indicators lights on.
Shift 1 (Low shift)
One indicator lights on.
Shift 0 (OFF)
No indicator lights on.
Shift 3 (High shift)
Three indicators lights on.
To enable the Night Light Mode, press the “Night Light” key, and press the
“Night Light” key again to turn off the the Night Light Mode.
One-key Knob
Turn the knob forward once to start the Female Mode. during the Female
Mode process, continue to rotate forward and adjust the washing intensity
circularly. Turn the knob backward once to start the Rear Mode, continue to
turn backward during the Rear Mode, and adjust the washing intensity
cyclically. Press the button in the middle of the knob for a short time to stop
the cleaning, drying or deodorizing functions. Press once long to activate
the Warm Air Drying function.
10
PREPARATION PRIOR TO INITIAL USAGE/OPERATION
·
Connect water supply hose, open check valve and plug in as per installation instructions.
·
Once the extension cord is plugged into the power socket, the bidet will send out a short
buzzing, the injection nozzle will extend out and retract back for once, nozzle self-cleaning
run for once and the night lamp will keep flashing till end of initiation process.
·
During initialization, sounds of operating motor and flowing water can be heard, which are
considered as normal conditions.
·
Initial operation of the Product will be run against default settings
：
Water temperature: Medium
Seat temperature: Medium
Warm air temperature: Medium
Night lamp function: Enabled
Energy saving mode: Disabled
Female Mode:
·
Water flow intensity: Medium
·
Nozzle position: Middle
Rear Mode:
·
Water flow intensity: Medium
·
Nozzle position: Middle
