___________________________________________________________________________________________________
SPYBALL 6808-9/6828-9 39
transmitter.
paragraph 15)
-
Operate the transmitter closer to the unit (the area might be
affected by noises interfering with the radio signal)
-
Replace the transmitter battery
-
Realign the transmitters (see paragraph 2.1. )
-
If none of these operations is successful, contact a Spyball
dealer (in the meantime, if the system is armed, disarm it with
the PIN code (see paragraph 16)
The alarm/immobiliser is disarmed, but
the motorcycle will not not start
(6828-9)
-
Make sure the motorcycle is in neutral gear
-
Make sure the kill switch is in the RUN position
-
Make sure the main ignition fuse in the motorcycle is intact
-
Make sure the motorcycle battery is charged
-
Some models will only start with the side stand up or the clutch
lever pulled in
– please check
-
If none of these operations is successful, contact a Spyball
dealer
The system is not triggered by
moving/lifting the bike
-
Has the inhibition time elapsed?
-
Is the movement detector activated (not deselected)?
-
If necessary, please adjust the movement detector (see
paragraph 7.)
-
If none of these operations is successful, contact a Spyball
dealer