___________________________________________________________________________________________________
SPYBALL 6808-9/6828-9 24
Press push-button n. 1 of a transmitter (or press both transmitters in turn, if you want to
pair
two).
The
LED illuminates shortly, to confirm that
pairing
has been successful.
Once the operation is completed, turn ignition off. If ignition remains on, the system will quit the
pairing
procedure anyway. In both cases the exit from the procedure is confirmed by a short sh arp audible
signal.
Important:
1)
For security reasons, every system can accept a maximum of two remote transmitters.
2)
Every
pairing
procedure disables the transmitters which the receiver had previously been paired
with. Therefore: if you have lost a transmitter and you wish to
pair
a spare one, do not forget that the
one which has remained in your possession has to be re-
paired
too (or it will stop working). If you do
not wish or you cannot
pair
a spare transmitter in a short time, re-
pair
the transmitter which has
remained in your hands: so doing you will disable the one you have lost.
3.
BIKER RECOGNITION
FUNCTION
Besides its operation as a conventional remote control key, the transmitter can be used in
Biker Recognition
mode.This function is selectable.
When the
Biker Recognition
function is enabled, the transmitter sends a coded signal at regular intervals (1,5
secs). The small LED on the transmitter flashes at the same rate. In this configuration the security system
activates automatically as the transmitter goes beyond the range of the receiver, that is when the biker walks
away from the parked motorcycle with the transmitter in his/her pocket more than about 3 meters. Similarly it
deactivates when the biker returns to his/her vehicle and the transmitter signal reaches the receiver. For more
details regarding arming and disarming in
Biker Recognition
mode
,
please see also the information provided in
the paragraphs below.