![background image](http://html.mh-extra.com/html/cobra/spyball-6808-9/spyball-6808-9_user-instructions_2630292033.webp)
___________________________________________________________________________________________________
SPYBALL 6808-9/6828-9 33
11. BACK-UP BATTERY SUPPLY
The 6800 is equipped with internal Ni-MH back-up batteries that recharge with the run of the motorcycle.
In the event that the normal power supply is interrupted (e.g. in the event that the cables of the motorcycle
battery are cut), the integrated back-up battery will allow the alarm system to sound (if armed) and thus signal
the sabotage. When the power supply is reinstated, the system sets itself to the same status (armed/disarmed)
as it was before the interruption.
12.
SERVICE MODE
If you are using the transmitter in
Biker Recognition
mode and you need to have your motorcycle serviced but
you prefer not to leave the transmitter with it, this quicker procedure will allow you to temporarily disable
automatic arming / disarming and the anti-hijack function without entering the selection procedure (
Service
set-
up).
Turn ignition on and press push-button n. 2 of the transmitter.
The system sets itself to
service mode.
This
is confirmed by a short sharp audible signal.
The
Biker Recognition
operation mode will be reinstated the first time push-button n. 1 is pressed again. In the
meantime you will hear four short sharp audible reminder signals every time ignition is turned off.
13.
”TURN INDICATOR ON”
AUDIBLE WARNING SIGNAL
This ancillary function does not relate to anti-theft protection, but it can make riding easier and safer. If you
enable it, the system will remind you with audible warning signals after a turn indicator has been flashing for
more than 24 seconds.
The procedure of selection is described in paragraph 14.