L S T/S
Answering System Operation
(continued)
BAT LOW
LISTENING TO RECORDED MESSAGES
(Monitor):
1. Pick up INTENNA handset; press and release MON button (TALK will
flash). To listen to general mailbox, follow steps 2-8 on p. 21. For
individual mailboxes, you must first press mailbox code number for
desired mailbox (0 + 1 for A, 0 + 2 for b, 0 + 3 for C or 0 + 4 for d), then
follow steps 2-8 on p. 21.
20
RING SELECTOR
Use the ring selector to determine the number of times
the system will ring before greeting will answer:
1. L (long) position: system will answer during the
5th ring
2. S (short) position: system will answer during the 2nd ring
3. T/S (toll-saver) position: system will answer during 5th ring if no
messages are waiting and on the 2nd ring if messages are waiting. Use
this feature if you will be calling in to your system long distance or
from a pay phone; if the phone rings 3 times, you have no messages
and may hang up without paying for the call.
ON/OFF BUTTON
Use this button to turn the answering system on or off; system can also be
turned on or off when you are away (see REMOTE section, p. 22).
LOW BATTERY INDICATOR
(Answering System)
Red light in upper right hand corner of answering system
(BAT LOW) will flash if the 9v battery back-up in the bottom
of the answering system needs to be installed or replaced. This battery will
supply power to your answering system in the event of a power outage; your
greeting and messages will be saved. If you do not have a working battery
installed in this system, your digitally recorded messages, greeting and
selected remote security code will be lost in the event of a power loss (battery
not included).
SPEAKER VOLUME CONTROL
Increase or decrease playback volume by sliding this control.
MONITOR
Use your INTENNA cordless phone handset to screen calls and listen to
messages while away from the base or change remote security code by
using the monitor (MON) button.
SCREENING CALLS
(Monitor):
You may start the monitor while the phone is ringing or at
anytime during greeting or incoming message by pressing and
releasing MON (TALK button will flash). You may then listen
to caller; should you decide to answer the call, press and
release the TALK button. Answering system will reset.