PLAYING MESSAGES (continued)
5.
To repeat current message, press
2
(repeating 2 will go back to each
earlier message).
6.
To erase current message, press
3 + 9
.
7.
To stop playback, press
8
.
8.
When last message has been played, a triple beep tells you there are no
more messages in that mailbox; you may then erase all messages in that
mailbox by pressing
3 + 0
. To access another mailbox, press code for
that mailbox (0 + 1 for A, 0 + 2 for B, 0 + 3 for C, 0 + 4 for D or 0+5 for
general mailbox). System will automatically hang up after 10 seconds if
no other remote function is accessed.
WHEN MEMORY IS FULL
(Remote)
When the message recording capacity has been reached (total of 20 minutes
for all mailboxes plus greeting), the system will ring 10 times before it
answers. When it answers, it will not play the greeting; instead you will
hear 3 beeps. You have 10 seconds to enter your security code and proceed
with message playback; you must erase messages from the system in order
for it to be able to record messages again.
RECORDING A NEW GREETING
(Remote):
If you are listening to messages, you must either stop (press 8) or wait until last
message is played before you may proceed with recording new greeting:
1.
Press
3 + 6
; hear a beep and then record your new greeting.
2.
When you are finished, press
8
. New greeting will play back.
RECORDING A MEMO
(Remote):
If you are listening to messages, you must either stop (press 8) or wait until last
message is played before you may proceed with recording memo:
1.
Enter code for mailbox desired if different than the one you are in (0 + 1
for A, 0 + 2 for B, 0 + 3 for C, 0 + 4 for D or 0+5 for general mailbox).
2.
Press
3 + 4
; hear a beep then record your memo.
3.
When you are finished, press
8
.
REMOTE SYSTEM TURN ON:
If your system is left OFF, you can turn it on from a remote location:
1.
Call your phone number from a touch tone phone, let it ring; system will
answer after 10 rings and you will hear 3 beeps
2.
Enter Remote Security Code
3.
Enter
3 + 1
; hear a beep and then proceed with desired remote funtion
4.
To turn system OFF while using the remote, enter
3 + 1
; hear 3 beeps.
System will hang up and will not answer.
Answering System Operation
(continued)
22