COBHAM Sailor 250 FleetBroadband, Training Manual, Page: 179 / 270

169
SAILOR FleetBroadBand
Training Manual
5
Error Log from current power cycle
Version: 1.11, build Build-bganx_bdu_ak-16, UTC Wed Nov 11
07:29:52 2009
____________________________________________________
000:00:32.933 NON FATAL Thread: POST (*** No UTC time
available ***)
[PostLogErr, build/build/source/p-bganx_bdu_ak/modules/
system/bgan_ut/base/post/src/post.cpp line 581]:
POST Failed: [0602:16] - ACM/ATB POST: GPS alive failed
SW Version: 1.11, build x_bdu_ak-16, UTC Wed Nov 11 07:29:52
2009 Curr. entry: 0 First
telnet:/$ post
POST results from last boot (NORMAL):
____________________________________________________
[0601:14] Passed FPGA test
[0602] FAILED!!!! - ACM/ATB POST
[0602:10] Passed Production data
[0602:11] Passed xDM tx gain
[0602:12] Passed Antenna type test
[0602:13] Passed Antenna calibration
[0602:14] Passed Sensor sanity check
[0602:16] FAILED!!!! GPS alive failed
[0603] Not tested - GPS POST
Test summary: 1 failed of 36 test
Replace the GPS module:
NOTE!
To view the ERRORLOG from
the debug shel, use the cmd:
Errorlog
To view it from the diagnostic
report, search for:
errorlog
NOTE!
To view the POST from the
debug shel, use the cmd:
post
To view it from the diagnostic
report, search for:
post
After a while it is normal that
the faiied test in post will
increase.
In this case the failing GPS
module will stop the system
from finishing the tests.
Therefore is is important to look
for the first event in the EVENT
LIST/ERREO LOG