COBHAM Sailor 250 FleetBroadband, Training Manual, Page: 141 / 270

131
SAILOR FleetBroadBand
Training Manual
5
”NETWORK_FOUND”
The UMTS network selected by the Non-Access Stratum has been
found and REGM is ready to initiate the Registration procedure
with the RNC.
”REG_STARTED”
REGM has received a request to establish a UE-Specific signalling
connection by either GMMH or MMH and is currently performing
the Registration procedure.
”CONNECTION_CREATION”
REGM has requested SSR to connect to the SIG-SAP and is
waiting for confirmation.
”CONDITIONAL_REG”
The UE is registered with the RNC and a UE-Specific signalling
connection between the UE and RNC has been established but
the RNC has indicated that validation of the UE position is required
before the UE can access network services (Registration Mode
0).
”POSITION_REQUESTED”
REGM has received the UEPositionRequest message from its
peer in the RNC.
”REGISTRATION_UPDATE”
REGM has received and responded to the UEPositionRequest
message and is waiting for validation from the RNC.
”REGISTERED”
The UE is registered with the RNC, a UE-Specific signalling
connection between the UE and RNC has been established, and
the UE has full access to network services (Registration Mode 3).
”DEREGISTER_COMPLETE”
The UE has been Deregistered from the RNC.
”HANDOVER”
REGM has informed the Bearer Connection layer of an intra-
RNC handover and is waiting for confirmation that the handover
procedure in the lower layers (Bearer Connection/Bearer Control)
has been completed.
”HANDOVER_LEASE”
REGM has informed the Bearer Connection layer of an intra-RNC
handover to a bearer allocated to the current subscriber’s Lease
Group and is waiting for confirmation that the handover procedure
in the lower layers (Bearer Connection/Bearer Control) has been
completed.
Figure 5-28
Figure 5-29