manualshive.com logo in svg

COBHAM Sailor 250 FleetBroadband, Training Manual, Page: 147 / 270

Share
Download
COBHAM Sailor 250 FleetBroadband Training Manual Download Page 147

137

SAILOR FleetBroadBand

Training Manual

5

000:00:27.933 NON FATAL Thread: POST  Estimated UTC Mon 

Dec 28 11:58:51 2009
[PostLogErr, build/build/source/p-bganx_bdu_ak/modules/

system/bgan_ut/base/post/src/post.cpp line 583]:
POST Failed: [0550] - Antenna Present
SW Version: 1.11, build x_bdu_ak-16, UTC Wed Nov 11 07:29:52 

2009 Prev. entry:  7 First
000:05:00.193 NON FATAL Thread: POST  Estimated UTC Mon 

Dec 28 11:58:51 2009
[PostLogErr, build/build/source/p-bganx_bdu_ak/modules/

system/bgan_ut/base/post/src/post.cpp line 583]:
POST Failed: [0602] - ACM/ATB POST
SW Version: 1.11, build x_bdu_ak-16, UTC Wed Nov 11 07:29:52 

2009 Prev. entry:  8
Error Log from current power cycle
Version: 1.11, build Build-bganx_bdu_ak-16, UTC Wed Nov 11 

07:29:52 2009

____________________________________________________

Module: 

PSM_CONTROL

, Status: Ok, Message:

Current uptime: 0 days 2:47:57.701

Current time: Mon Nov 09 13:03:00 2009
Approximate boot time: Mon Nov 09 10:15:03 2009
Last reboot type: REBOOT_TYPE_FATAL_ERROR [0x02]
Reboot type counters:

Requested 14

Sudden powerloss 

18

Watchdog 0

Fatal error 

4

Module: 

IAI2-AL_REGM

, Status: Ok, Message:

Model Ref: 6, MODEL_REF_TT3738, SAILOR 250/500. Model: 

SAILOR. UT Class Type: 3, UT_CLASS_TYPE_MARITIME. 

ManualPointing: 0
System: 3, SYSTEM_SAILOR_500. SAILOR 500 FleetBroadband. 

UT Class: 8, maritime-high-gain (8),UTCLASS_MARITIME_HIGH 

(8)
Satellite Selection - 

Preferred: AUTO, Auto selection

. MMI code: 4

DSP Allocation State: BCt.  No maintained radio silence.   
GlobalDiscoverCause:
UNI_REGM_SATELLITE_SELECTION_INITIAL.

NOTE!

Fatal error when the antenna 

fails to respond. Fatal error will 

cause a reboot as the system 

will try to recover.

NOTE!

Doing the power op self test, 

POST, the  antenna is not 

found. Causing a:

POST Failed: [0550] - Antenna 

Present.

NOTE!

And caused by that the 

communicatiom with ATC/ACM 

fails. Causing a :

 POST Failed: [0602] - ACM/

ATB POST

NOTE!

And caused by that the 

communicatiom with ATC/ACM 

fails. Causing a :

 POST Failed: [0602] - ACM/

ATB POST

NOTE!

Search for: 

PSM_Control 

This will hold information 

about the system uptime, and 

the type of reboots previus 

performed.

NOTE!

Search for: 

The IAI2-AL_REGM 

This statuis will hold 

informationsof  what kind of 

’satellite selection’ is made 

and witch Inmarsat satellite the 

terminal has found.

NOTE!

FBB 500 = class 8

Satelitte selection = AUTO

Satellite found = EMEA

Summary of Contents for Sailor 250 FleetBroadband















































































































































































































































































Reviews:

No comments