COBHAM Sailor 250 FleetBroadband, Training Manual, Page: 117 / 270

107
SAILOR FleetBroadBand
Training Manual
4
Figure 4-14
4.6 LAN Interface, VOIP
Figure: 4-15
Connection IP handset to the LAN interface
To connect the Thrane IP Handset to the terminal, do as follows:
Connect the cable from the IP cradle to one of the LAN connectors
on the terminal, preferably port 1. In case of insufficient power to
the LAN PoE the LAN ports are prioritized, so that port 1 is the
last to be shut down. Note that the handset and terminal must
be set up to be able to communicate with each other. For further
information, refer to the user manual for the handset.
Setting up the IP handsets
:
Select SETTINGS > IP handsets .
Select
Edit
next to a handset to change the password of the
handset. Remember that you must enter the same password and
local number (user name) in the IP handset.
Figure 4-16
Add a IP handset
;
Select – Settings / IP handsets
The Username / Number is predefine to 0501-0516
Default to set incoming / outgoing calls, select “call settings”
The IP handset will show as user “0501” password “0501” Change
password To connect IP handset #2
Connect the IP handset to the terminal. Find the IP address of the
new IP handset, open LAN / Network devices.
The IP handset #2 will show in the Network device list. [linieskift
NOTE!
Default SIP profile—0501
Incoming 3.1khz call disabled.
NOTE!
The first IP handset that is
connected to the LAN interface
on the terminal is automatically
registered in the terminal and
assigned the local number
0501 and password 0501.
SIP profiled 0502—0516
must be setup in handset and
terminal SIP profiles , though
a setting up in the IP Handset
can make this procedure
automatic, so that the following
IP Handsets will automatically
be given the next free number
(0502 - 0516). See more in
setting up the IP Handset in the
Thrane IP Handset Manual