COBHAM Sailor 250 FleetBroadband, Training Manual, Page: 113 / 270

103
SAILOR FleetBroadBand
Training Manual
4
Example : To call entry number 4 in the phone book,
dial 004 followed by #
Manual Dial :
00 <country code> <phone number> followed by #
Example : To call Cobham SATCOM in Denmark (+45 39558800)
from an analog or ISDN phone, dial 00 45 39558800 #
4.3.1 Configuring the Phone/Fax interface
Select SETTINGS > Phone/Fax from the left navigation pane.
For each Phone/Fax port, set the call type for incoming and
outgoing calls.
For Incoming calls, you can select Standard or 3.1 kHz Audio or
both.
If you select both, any device connected to the Phone/Fax interface
will react (ring) on incoming calls.
If you select e.g. Standard, the Phone/Fax interface will only react
on calls made to the Standard phone number.
For Outgoing calls, you can select either Standard or 3.1 kHz
Audio. The selected type will be used by default, if possible, for
any outgoing call.
Fax machines must use 3.1 kHz Audio .
You can override the default setting for outgoing calls by dialing
1* (force the call to Standard) or 2* (force the call to 3.1 kHz
Audio) before the number.
Example:
Figure 4-8
Figure 4-9
NOTE!
Services:
Phone: standard voice,
Fax: 3.1khz
Incoming std. voice will ring
port #1
Incoming Fax/3.1khz will ring
port # 2